Step 1
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
419200www.sauder.com/services
Page 5
(12 used)
10F
Do not tighten the TWIST-LOCK® FASTENERS in this step.
å
Assemble your unit on a carpeted fl oor or on the empty
carton to avoid scratching your unit or the fl oor.
å
To begin assembly, push a SAUDER TWIST-LOCK®
FASTENER (10F) into the large holes in a TOP/BOTTOM (C)
and SHELF (D).
å
Repeat this step for the other TOP/BOTTOM (C).
10F
D
C
To Next Page
Loading...
