Sauder 419200 - Step 2: Attach Angle Brackets

Step 2
419200 www.sauder.com/servicesPage 6
C
C
å
Fasten six ANGLE BRACKETS (5G) to the TOP/BOTTOMS (C).
Use six BLACK 9/16" LARGE HEAD SCREWS (1S).
å
NOTE: Be sure the edges of the ANGLE BRACKETS are
even with the edges of the TOP/BOTTOMS.
BLACK 9/16" LARGE HEAD SCREW
(6 used in this step)
1S
Remember:
Righty tighty.
Lefty loosey.
5G