Sauder 419321 - Step 7: Attach Angle Brackets

å
Fasten the ANGLE BRACKETS (27G) to the FRONT PANEL (F).
Use four BLACK 9/16" LARGE HEAD SCREWS (1S).
å
NOTE: The ANGLE BRACKETS should be even with the edge
of the FRONT PANEL.
Step 7
419321www.sauder.com/services
Page 11
BLACK 9/16" LARGE HEAD SCREW
(4 used in this step)
1S
Surface with
TWIST-LOCK®
FASTENERS
F
27G
Finished edge