Step 1
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
å
Assemble your unit on a carpeted fl oor or on the empty carton to
avoid scratching your unit or the fl oor.
å
To begin assembly, push a SAUDER TWIST-LOCK® FASTENER (10F)
into the large holes in the ENDS (A and B).
å
Repeat this step for the FRONT PANEL (F) and LOWER SHELF (H).
419321www.sauder.com/services
Page 5
(12 used)
10F
Do not tighten the TWIST-LOCK® FASTENERS in this step.
A
B
To Next Page
Loading...
