Sauder 419321 - Step 2: Attach End Moldings

Step 2
419321 www.sauder.com/servicesPage 6
å
Slide the END MOLDINGS (J) onto the notched edges of
the ENDS (A and B).
å
*U.S. Patent No. 5,499,886
Notched edge
Slide the END MOLDING (J) onto the notched edge.
A
B
J
J
Surface with
TWIST-LOCK®
FASTENERS
Surface with
TWIST-LOCK®
FASTENERS
These surfaces should be even.