Sauder 419954 - Step 8

Step 8
419954 www.sauder.com/servicesPae 12
Fill the holes 1/4 to 1/2 full with GLUE.
Inspect the parts thorouhly before
assemblin. Disassembly of lued
parts is extremely di cult.
Caution
!
54M
15F
å
First, fi ll two holes in the UPRIGHTS (D and E) 1/4 to 1/2 full with GLUE (54M).
Then, insert two WOOD DOWELS (15F) into the holes. Wipe away the
excess GLUE.
å
NOTE: Be sure to position the parts exactly as shown.
å
Now, fi ll the holes in the REAR LEGS (Q and R) 1/4 to 1/2 full with GLUE (54M).
å
Fasten the REAR LEGS (Q and R) to the UPRIGHTS (D
and E). Tihten six HIDDEN CAMS.
å
NOTE: Be sure the WOOD DOWELS in the UPRIGHTS insert into the REAR
LEGS. Wipe away the excess GLUE.
15F
D
E
Q
R
These surfaces
should be even.
These surfaces
should be even.
Surface with
TWIST-LOCK®
FASTENERS
Surface with
TWIST-LOCK®
FASTENERS
Ede with
TWIST-LOCK®
FASTENERS
Ede with
TWIST-LOCK®
FASTENERS
End without hole
End with hole