Sauder 419954 - Step 9

Step 9
419954www.sauder.com/services
Pae 13
Fill the holes 1/4 to 1/2 full with GLUE.
Inspect the parts thorouhly before
assemblin. Disassembly of lued
parts is extremely di cult.
Caution
!
54M
15F
å
First, fi ll two holes in the FRONT LEGS (H and P) 1/4 to 1/2
full with GLUE (54M). Then, insert two WOOD DOWELS (15F)
into the holes. Wipe away the excess GLUE.
å
Now, fi ll the holes in the UPRIGHTS (D and E) 1/4 to 1/2 full
with GLUE (54M).
å
Fasten the FRONT LEGS (P and H) to the UPRIGHTS (D
and E). Tihten six HIDDEN CAMS.
å
NOTE: Be sure the WOOD DOWELS in the FRONT LEGS
insert into the UPRIGHTS. Wipe away the excess GLUE.
15F
D
E
H
P
These surfaces
should be even.
Surface with
TWIST-LOCK®
FASTENERS
Surface with
TWIST-LOCK®
FASTENERS
These surfaces
should be even.
Ede with
TWIST-LOCK®
FASTENERS
Ede with
TWIST-LOCK®
FASTENERS
End with hole
End without hole