Sauder 419954 - Step 19

Step 19
419954www.sauder.com/services
Pae 23
å
Fasten the PENCIL DRAWER SIDES (D427 and D428)
to the PENCIL DRAWER BACK (D425). Use two
BLACK 1-9/16" FLAT HEAD SCREWS (30S).
å
Slide the PENCIL DRAWER BOTTOM (B37) into the
grooves in the PENCIL DRAWER SIDES (D427 and D428)
and PENCIL DRAWER BACK (D425).
å
Fasten the PENCIL DRAWER BOX FRONT (D506) to the
PENCIL DRAWER SIDES (D427 and D428). Use two BLACK
1-9/16" FLAT HEAD SCREWS (30S).
12
3
Groove
D425
D427
D428
Start each screw a few turns before
completely tihtenin any of them.
BLACK 1-9/16" FLAT HEAD SCREW
(2 used in this step)
30S
D425
D427
D428
B37
Finished surface
D427
D428
D506
30S
Start each screw a few turns before
completely tihtenin any of them.
BLACK 1-9/16" FLAT HEAD SCREW
(2 used in this step)
30S
Be sure the DRAWER
BOTTOM inserts into the
DRAWER BOX roove.
With the palm of your hand,
tap the DRAWER BOTTOM
down into the roove.