Sauder 419954 - Step 20

Step 20
å
Fasten the PENCIL DRAWER FRONT (L) to the PENCIL
DRAWER MOLDING (M). Tihten two HIDDEN CAMS.
å
Fasten two KNOB SETS (136K) to the PENCIL DRAWER
FRONT (L). Use two BLACK 7/8" MACHINE SCREWS (37S).
419954 www.sauder.com/servicesPae 24
Surface with HIDDEN CAMS
M
L
M
L
Surface without HIDDEN CAMS
136K
BLACK 7/8" MACHINE SCREW
(2 used in this step)
37S
These surfaces
should be even.
Curved ede