Sauder 419954 - Step 28

Step
419954 www.sauder.com/servicesPae 32
Step 28
å
To make adjustments to the SMALL DRAWERS, loosen SCREW #3 in the SLIDES a 1/4 turn, then turn the CAM
clockwise or counter-clockwise. Notice how the drawer raises or lowers as you turn the CAM. The hiher the
screw in the oblon hole, the hiher your drawer front will be. The lower the screw, the lower the drawer front. By
adjustin the drawers this way, it will help the DRAWER FRONTS line up better when closed. Tihten the SCREW
when fi nished with adjustments.
å
NOTE: Loosen screw #4 to make adjustments to the LARGE DRAWERS.
å
NOTE: Please read the back paes of the instruction booklet for important safety information.
å
This completes assembly. Clean with your favorite furniture polish or a damp cloth. Wipe dry.
The hiher the screw in the oblon hole,
the hiher your drawer front will be. The
lower the screw, the lower the drawer front.
And to celebrate, why not share your success story?
Cam
Loosen screw #3 a 1/4 turn, turn the cam a 1/4 turn
maximum in both the clockwise and counter-clockwise
directions to make adjustments, and then tihten screw #3.
32