Sauder 419954 - Step 1

Step 1
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
å
Assemble your unit on a carpeted fl oor or on the empty
carton to avoid scratchin your unit or the fl oor.
å
To bein assembly, push a SAUDER TWIST-LOCK®
FASTENER (12F) into the lare holes in the ENDS (A
and B) and UPRIGHTS (D and E).
å
Repeat this step for the BOTTOMS (C), MODESTY
PANEL (G), and SHELF (N).
419954www.sauder.com/services
Pae 5
A
B
D
E
Do not tihten the TWIST-LOCK® FASTENERS in this step.
(22 used)
12F