Sauder 420203 - Page 17

å
Carefully stand your unit upright.
å
Turn four CAM SCREWS (7) into the SHELF (K).
å
Insert four HIDDEN CAMS (5) into the ENDS (E and F).
å
Fasten the SHELF (K) to the ENDS (E and F). Tighten four
HIDDEN CAMS.
Step 13
Page 17www.sauder.com420203
3
21
5
The arrow must
point toward the
edge of the board.
E
F
K
K
Surface
with holes
5
5
7