Sauder 420203 - Page 26

Step 22
å
Pull the extensions of the RAILS (1 and 2) out from the
RAILS. Insert the DRAWER (Z) so it rests on the brackets
of the RAILS. Line up the holes in the DRAWER SIDES (U
and V) with the brackets on the RAILS.
å
Fasten the DRAWER (Z) to the RAILS (1 and 2). Use four
BLACK 1/2" FLAT HEAD SCREWS (19).
Page 26 www.sauder.com 420203
BLACK 1/2" FLAT HEAD SCREW
(4 used in this step)
19
Z
1
2
V
U