Step Step 23
å
Finish drilling out the pre-drilled hole with your electric
drill and 1/4" drill bit to fasten the BOTTOM(F2) to the
LARGE END (B2) and UPRIGHT (D2).
å
Fasten the BOTTOM (F2) to the ENDS (A2 and B2)
and UPRIGHT (D2). Use six BLACK 1-15/16" FLAT
HEAD SCREWS (113S).
Rounded edge
A2
B2
D2
F2
Drill through these
pre-drilled holes.
Unfi nished
surface
BLACK 1-15/16" FLAT HEAD SCREW
(6 used in this step)
113S
422427www.sauder.com/services
Page 29
LARGE DOOR ON RIGHT
To Next Page
Loading...
