Sauder 422427 - Page 39

Step 33
å
With a hammer, gently tap twelve SHELF SNAPS (8R) into the
holes in the ADJUSTABLE DOOR SHELVES (O).
å
Insert twelve METAL PINS (1R) into the hole locations of your
choice in the DOOR END (C) and DOOR UPRIGHT (H). Set the
DOOR SHELVES onto the METAL PINS and push down until each
SHELF "snaps" into the SHELF SNAP (8R).
å
Push the RUBBER SLEEVES (2R) over sixteen METAL PINS (1R).
Insert the METAL PINS into the hole locations of your choice in
the ENDS (A2 and B2) and UPRIGHT (D2). Set the ADJUSTABLE
SHELVES (N and P) onto the METAL PINS.
B2
C
N
N
O
O
O
P
P
H
2R
1R
1R
422427www.sauder.com/services
Page 39
D2
LARGE DOOR ON RIGHT
O
8R
(12 used)
8R
A2
(16 used)
(12 used)