Sauder 423032 - Step 4: Installing Top Molding

Step 4
å
Fasten the TOP MOLDING (M25) to the TOP (E2). Use
three BLACK 1-1/8" PAN HEAD SCREWS (9S).
å
NOTE: Do not overtighten the SCREWS into the TOP.
å
Insert three HOLE PLUGS (80P) into the holes in the
TOP MOLDING (M25).
423032 www.sauder.com/servicesPage 8
E2
Curved edge
BLACK 1-1/8" PAN HEAD SCREW
(3 used in this step)
9S
80P
Remember:
Righty tighty.
Lefty loosey.
M25