å
Carefully turn your unit over onto its back edges.
å
Insert two WOOD DOWELS (1) into the ENDS (A and B).
å
Fasten the BACK SKIRT (H) to the TOP/BOTTOM (E) as
shown. Use two 1/2" FLAT HEAD SCREWS (10) through
the METAL BRACKET and into the TOP/BOTTOM.
Step 7
A
B
E
1
H
1/2" FLAT HEAD SCREW
(2 used in this step)
10
Page 11www.sauder.com/service426927
To Next Page
Loading...
