Sauder 429430 - Step 10: Mounting Doors and Pulls

å
Carefully stand your unit upright.
å
Fasten the DOORS (H and N) to the ENDS (A and B). Slide the HINGES
on the DOORS onto the HINGE BRACKETS on the ENDS. Secure the
DOORS with the mounting screw on the HINGE BRACKET.
å
See the enlarged diagrams for adjustments.
å
Fasten the PULLS (4) to the DOORS (H and N). Use four 7/8"
MACHINE SCREWS (15).
Step 10
H
N
A
B
Mounting
screw
HINGE BRACKET
4
4
17
7/8" MACHINE SCREW
(4 used for the PULLS)
15
Page 14 www.sauder.com 429430 / 168-0094-8