Step 1
Look for this icon. It means a video assembly tip is
available at www.sauder.com/service/tips
Find the numbered video or scan the QR code.
å
Assemble your unit on a carpeted fl oor or on the empty
carton to avoid scratching your unit or the fl oor.
å
Fasten a ROD HANGER (7) to the UPRIGHT (C). Use two
1/2" FLAT HEAD SCREWS (15) though the outer holes in
the ROD HANGER.
å
Turn three CAM SCREWS (3) into the UPRIGHT(C). Flip
the UPRIGHT over and turn two CAM SCREWS into the
UPRIGHT exactly as shown.
C
C
F
L
I
P
O
V
E
R
3
3
7
Notch
Notch
1/2" FLAT HEAD SCREW
(2 used in this step)
15
1
Page 6 www.sauder.com/service 430083
To Next Page
Loading...
