å
Carefully turn your unit over onto its front edges and lay
the BACK (H) over the large opening.
å
Fasten the BACK (H) to your unit using the NAILS (1N).
å
NOTE: Be sure the BACK is not hanging over the top
surface of the TOP.
å
Carefully stand your unit upright.
å
Go to Step 19 if you did not purchase the optional Hidden
Wireless Qi Compatible Charger by Eggtronic.
Step 17
NAIL
(20 used in this step)
1N
H
Finished surface
The edge of the BACK
should be even with
the BOTTOM and
UPRIGHT surfaces.
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
Caution
Page 22
To Next Page
Loading...
