Sauder Carson Forge 412920 - Page 6

Step 1
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
å
Assemble your unit on a carpeted fl oor or on the empty
carton to avoid scratching your unit or the fl oor.
å
Push ten HIDDEN CAMS (1F) into the RIGHT END (A),
UPRIGHT (D), BOTTOM (F), and BRACE (I). Then, insert the
metal end of a CAM DOWEL (2F) into each HIDDEN CAM.
I
A
D
F
(10 used)
Arrow
1F
2F
Insert the metal end of the CAM
DOWEL into the HIDDEN CAM.
Arrow
Do not tighten the HIDDEN CAMS in this step.
Page 6