Sauder Carson Forge 415520 - Page 6

Step 1
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
å
Assemble your unit on a carpeted fl oor or on the empty
carton to avoid scratchin your unit or the fl oor.
å
Push twenty-two HIDDEN CAMS (1F) into the
ENDS (A and B), UPRIGHT (C), BOTTOM (E), and
DRAWER BRACES (Q). Then, insert the metal end of a
CAM DOWEL (2F) into each HIDDEN CAM except the
lon edes of the ENDS (A and B).
415520 www.sauder.com/servicesPae 6
Arrow
1F
2F
Do not tihten the HIDDEN CAMS in this step.
(16 used)
(22 used)
Insert the metal end of the CAM
DOWEL into the HIDDEN CAM.
Arrow
Do not insert CAM
DOWELS into
these lon edes.
A
B
E
C
Q