Sauder Executive Desk 408289 - Step 13: Fasten Metal Brackets and Bases

Step 13
å
Fasten sixteen METAL BRACKETS (4G) to the ENDS (A2 and B2), UPRIGHTS (C2
and D2), and BRACES (H2). Use sixteen BLACK 9/16" LARGE HEAD SCREWS (1S).
å
NOTE: Be sure the edges of the ANGLE BRACKETS are even with the edges of the
ENDS, UPRIGHTS, and BRACES.
å
Next, fasten the BASES (J) to the ENDS (A2 and B2), UPRIGHTS (C2 and D2), and
BRACES (H2). Use sixteen BLACK 9/16" LARGE HEAD SCREWS (1S).
408289 www.sauder.com/servicesPage 18
(16 used)
4G
4G
4G
BLACK 9/16" LARGE HEAD SCREW
(32 used in this step)
1S
C2
B2
D2
A2
H2
J
H2
H2
H2
J
J
J