Sauder Executive Desk 408289 - Step 14: Assemble Keyboard Shelf Components

å
Fasten the KEYBOARD PULL (21K) to the KEYBOARD SHELF (N2).
Use two BLACK 9/16" PAN HEAD SCREWS (51S).
å
Fasten the KEYBOARD BACK (L) to the KEYBOARD SHELF (N2).
Use two BROWN 1-1/2" FLAT HEAD SCREWS (14S).
å
Fasten the KEYBOARD SIDES (LLL and M2) to the KEYBOARD
BACK (L) and KEYBOARD SHELF (N2). Use four BROWN 1-1/2"
FLAT HEAD SCREWS (14S).
Step 14
408289www.sauder.com/services
Page 19
L
LLL
N2
M2
N2
BLACK 9/16" PAN HEAD SCREW
(2 used for the KEYBOARD PULL)
51S
BROWN 1-1/2" FLAT HEAD SCREW
(6 used in this step)
14S
21K
Unfi nished
surface
Long fi nished edge
Long fi nished edge
Finished surface
These surfaces should be the same color.