Sauder Harbor View 417586 - Page 28

Step
å
Fasten the TIE PLATES (41G) to the TOP (G3). Use four
BLACK 9/16" LARGE HEAD SCREWS (1S).
å
Fasten an ANGLE BRACKET (5G) to the TOP (G3) and
MODESTY PANEL (I). Use two BLACK 9/16" LARGE
HEAD SCREWS (1S).
å
Turn two CORD CLIPS (4P) into the TOP (G3).
å
NOTE: The CORD CLIPS are used to hold your keyboard
cord against the TOP.
Step 22
41G
Use these holes.
BLACK 9/16" LARGE HEAD SCREW
(6 used in this step)
1S
5G
4P
Now might be a
good time to refresh
your drink.
The CORD CLIP
for this hole will be
inserted in Step 36
after the two TOPS
are attached.
I
G3
417586 www.sauder.com/servicePage 28
DOOR ON LEFT AND
DRAWERS ON RIGHT