Step
å
Use a drill and a 1/8" drill bit to fi nish drilling the two holes shown
in the DRAWER RIGHT END (C).
å
Fasten the MODESTY PANEL (I) to the LEFT UPRIGHT (F). Use
two BLACK 1-1/8" PAN HEAD SCREWS (9S).
å
Fasten the MODESTY PANEL (I) to the DRAWER RIGHT END (C).
Use two BLACK 1-7/8" FLAT HEAD SCREWS (2S).
Step 28
D
C
F
I
BLACK 1-1/8" PAN HEAD SCREW
(2 used in this step)
9S
BLACK 1-7/8" FLAT HEAD SCREW
(2 used in this step)
2S
Use a 1/8" drill bit to fi nish drilling these holes completely through.
417586 www.sauder.com/servicePage 34
DOOR ON RIGHT AND
DRAWERS ON LEFT
To Next Page
Loading...
