Sauder Harbor View 417586 - Page 35

Step
å
Fasten the TIE PLATES (41G) to the TOP (G3). Use four
BLACK 9/16" LARGE HEAD SCREWS (1S).
å
Fasten an ANGLE BRACKET (5G) to the TOP (G3) and
MODESTY PANEL (I). Use two BLACK 9/16" LARGE
HEAD SCREWS (1S).
å
Turn two CORD CLIPS (4P) into the TOP (G3).
å
NOTE: The CORD CLIPS are used to hold your keyboard
cord against the TOP.
Step 29
41G
5G
4P
The CORD CLIP
for this hole will be
inserted in Step 36
after the two TOPS
are attached.
G3
BLACK 9/16" LARGE HEAD SCREW
(6 used in this step)
1S
I
417586www.sauder.com/service
Page 35
DOOR ON RIGHT AND
DRAWERS ON LEFT
Use these holes.