Sauder Harbor View 417587 - Page 14

å
Insert four METAL PINS (1R) into the SMALL BACKS (J).
å
Insert the METAL PINS (1R) in the SMALL BACKS (J) into
the holes in the ENDS (A and B).
å
Fasten the SMALL BACKS (J) to the BOTTOMS (G). Use
four BLACK 1-7/8" FLAT HEAD SCREWS (2S).
Step 10
417587 www.sauder.com/servicesPage 14
1R
J
J
G
G
A
B
Finished edge
BLACK 1-7/8" FLAT HEAD SCREW
(4 used in this step)
2S
Surface without holes
Surface without holes
1R