Sauder Home Plus Base Cabinet - Step 2: Attach Ends to Top; Secure Ends to Top Panel

å
Fasten the ENDS (A and B) to the TOP (C). Tighten four
TWIST-LOCK® FASTENERS.
Step 2
A
B
C
Surface with holes
1. Insert the dowel end of the FASTENER into the hole of the
adjoining part.
NOTE: The dowel end of the FASTENER must remain fully
inserted in the hole of the adjoining part while locking
the FASTENER.
2. Tighten the FASTENER with a Phillips screwdriver as tight
as possible.
Dowel end
Finished edge
Edge with TWIST-LOCK® FASTENERS
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
Caution
How to use the TWIST-LOCK
®
FASTENER
Page 6