Sauder Home Plus Base Cabinet - Step 4: Install Top Molding; Attach Top Molding and Tie Plate

å
Fasten the TOP MOLDING (J) to the TOP (C). Tighten
three TWIST-LOCK® FASTENERS.
å
Slip a LARGE RUBBER SLEEVE (P) over the TIE
PLATE (O). The RUBBER SLEEVE will be a tight fi t.
å
Then, fasten the TIE PLATE (O) to the TOP MOLDING (J).
Use a BLACK 9/16" LARGE HEAD SCREW (Z).
Step 4
J
C
O
P
Wide edge
BLACK 9/16" LARGE HEAD SCREW
(1 used for the TIE PLATE)
Z
Page 8