Sauder HomePlus 411312 - Page 17

å
Pull the DRAWER FRONT BRACKETS (II) apart and slide them
into the grooves in the DRAWER SIDES (D50 and D51). You
may need to gently tap them in with a hammer.
å
NOTE: The DRAWER FRONT BRACKETS are marked "RH"
and "LH" for easy identifi cation.
å
Fasten the DRAWER FRONT (L) to the DRAWER
FRONT BRACKETS (II). Use four BLACK 9/16" LARGE
HEAD SCREWS (QQ).
å
Slide the DRAWER BOTTOM (D983) into the grooves in the
DRAWER SIDES (D50 and D51) and DRAWER FRONT (L).
Step 12
411312www.sauder.com/services
Page 17
L
II
II
L
With the palm of your hand,
tap the DRAWER BOTTOM
down into the groove.
Groove
Unfi nished surface
II
1
st
2
nd
BLACK 9/16" LARGE HEAD SCREW
(4 used in this step)
QQ
D51
D983
D51
D50
D50
VIEW THE T-SLOT BOX VIDEO