Step 3
å
Fasten the LEFT END (B) to the TOP (C) and SHELF (F).
Tighten four TWIST-LOCK® FASTENERS.
411312 www.sauder.com/servicesPage 8
B
C
F
Finished surface
Edge with
TWIST-LOCK®
FASTENERS
Unfi nished surface
Long fi nished edge
Finished edge
How to use the SAUDER TWIST-LOCK
®
FASTENER
1. Insert the dowel end of the FASTENER into the hole of the
adjoining part.
NOTE: The dowel end of the FASTENER must remain fully
inserted in the hole of the adjoining part while locking
the FASTENER.
2. Tighten the FASTENER with a Phillips screwdriver as tight
as possible.
Dowel end
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
Caution
To Next Page
Loading...
