Sauder Summit Station 425014 - Page 21

å
First, fi ll the hole in the RIGHT END (A) 1/4 to 1/2 full with GLUE.
å
Next, fasten the RIGHT END (A) to the LONG MODESTY
PANEL (E) and BRACE(N), and fasten the RIGHT BOTTOM
MOLDING (S) to the BOTTOM (D). Tighten fi ve HIDDEN CAMS.
å
NOTE: Be sure the WOOD DOWEL in the BRACE (N)
inserts into the RIGHT END (A). Wipe away the excess GLUE.
Step 16
425014www.sauder.com/service
Page 21
D
N
Arrow
Minimum
190 degrees
Maximum
210 degrees
Fill the holes 1/4 to 1/2 full with GLUE.
Inspect the parts thoroughly before
assembling. Disassembly of glued
parts is extremely di cult.
Caution
!
A
S
E
54M