Need help?Do you have a question about the Saunier Duval ThemaPLUS CONDENS F 30 E and is the answer not in the manual?
General safety information regarding the appliance.
Details of the appliance's guarantee period, coverage for manufacturing defects, and responsibilities of the user and manufacturer.
Description of the control panel components including operating indicator, display, mode selection, temperature adjustments, and on/off switch.
Instructions for adjusting domestic hot water and central heating temperatures using the +/- buttons.
Table of fault codes, descriptions, and possible causes for ignition, overheat, thermistor, and circulation faults, requiring skilled professional diagnosis.
Information on protecting the boiler and installation from frost.
How to protect the boiler from frost by ensuring power and gas supply and selecting the correct operating mode.
Emphasis on not altering the appliance without permission, as it can invalidate warranty and statutory compliance.
Precautions regarding gas pressure, avoiding electric shock, proper connection, cleaning heat exchangers, and handling sealed parts.
Requirements for installation and commissioning by competent persons, referencing manufacturer instructions, Gas Safety regulations, and building regulations.
General information about appliance installation, with all dimensions expressed in mm.
Instructions for connecting gas and water pipes, emphasizing cleaning, using appropriate solvents, and checking for leaks.
Guidance on different flue outlet configurations, using approved accessories, and ensuring a slope for condensate return.
Information on horizontal concentric flue installation, including maximum flue index and length considerations for elbows.
Specifications for vertical concentric flue installation, including maximum flue index and length adjustments for elbows.
Warning about incorrect installation causing electric shock and guidance on connecting the boiler to the power supply.
Step-by-step guide to commissioning the boiler, including starting, checking for leaks, ignition, and system pressure.
Instructions for adjusting the heating circuit flow rate using the integrated bypass screw and pump speed selector.
Procedure to access and adjust technical data menus (COD.1-COD.8) for parameters like heating power, flue configuration, and pump mode.
Steps for controlling and commissioning the appliance after installation, including checking operation, leaks, ignition, and safety devices.
Warning to read safety instructions before replacing parts and ensuring the boiler is drained.
Instructions for replacing hydraulic components.
Instructions for replacing combustion components.
Steps for removing the silencer, burner unit, heat fuse connector, and pipe clips, then removing the heat exchanger.
Instructions for replacing expansion and storage vessels.
Instructions for replacing ignition and control components.
Instructions for replacing control panel components.
Table of technical specifications for the ThemaPLUS CONDENS F 30 E boiler, including heating and DHW outputs, efficiencies, and flow rates.
Technical data related to combustion, including air flow rates, flue outlet temperatures, CO, CO2, and NOx balance values.
Specifications for height, width, depth, and net weight of the appliance.
Data for natural gas G 20, including DHW and heating flow rates, and inlet pressure.
General| Type | Condensing |
|---|---|
| Output | 30 kW |
| Max. Heating Output | 30 kW |
| DHW Output | 30 kW |
| Efficiency Rating | A |
| Dimensions (HxWxD) | 740 x 418 x 344 mm |
| Max working temperature | 80 °C |
| Ignition | Electronic |
| Heat exchanger material | Stainless Steel |
| Fuel Type | Natural Gas |
| Mounting | Wall |
| Water pressure | 0.3 - 3.0 bar |
To Next Page