Need help?Do you have a question about the Saunier Duval ThemaClassicPlus F 24 E and is the answer not in the manual?
Details heating performance parameters like temperature, power, and flow rate.
Lists specifications for domestic hot water production, including temperature and pressure.
Provides gas pressure and flow rate data for different gas types like natural gas and propane.
Explains access to a hidden menu for installers and after-sales service via codes.
Guides on adjusting burner pressure for reduced power output, locking at reduced pressure.
Guides on adjusting burner pressure for maximum power output, locking at maximum power.
Defines fan speed adjustment based on flue length and boiler model for optimal performance.
Explains outdoor sensor setup via menu points 4, 6, and 7 for temperature compensation.
Explains checks for air flow safety issues and symbol display on the unit.
Details checks for ignition failures, voltage requirements, and electrode connections.
Lists checks for overheating loop faults like pump, thermostat, or electrical connections.
Details checks for heating sensor loop faults, including open or short circuits.
Explains checks for pressure sensor loop faults, sensor insulation, and connections.
Provides checks for lack of water in the primary circuit, recommending water topping-up.
Lists checks for excessive water pressure issues, including expansion vessel and sensors.
General| Fuel Type | Natural Gas |
|---|---|
| Output | 24 kW |
| DHW Output | 24 kW |
| Maximum working pressure | 3 bar |
| Flue diameter | 60/100 mm |
| Type | Condensing |
| Mounting | Wall-mounted |
To Next Page