EasyManua.ls Logo

Saunier Duval ISOMAX F 28 E - User Manual

Saunier Duval ISOMAX F 28 E
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
1
THIS IS A CAT I2E+ APPLIANCE
01773 828100
IN WARRANTY
TECHNICAL HELPLINE
01773 828400
ISOMAX
Question and Answer IconNeed help?

Do you have a question about the Saunier Duval ISOMAX F 28 E and is the answer not in the manual?

Summary

Installation and Operating Instructions

Users Section Overview

Overview of user-specific functions and operation of the boiler.

Installation Section Guide

Detailed guidance on installing the boiler, including system design and connections.

Servicing Section Procedures

Procedures for routine maintenance, cleaning, and part replacement.

Introduction and Safety Guidelines

Boiler Introduction and Gas Safety

Describes boiler features, gas safety regulations, and installation requirements.

Boiler Controls and Health Hazards

Explains boiler controls, safety shutdown, and hazards from insulation materials.

Boiler Controls and Lighting

Boiler Lighting and Mode Selection

Instructions for lighting, stopping, and setting the boiler modes (Summer/Winter).

Temperature Adjustment Guide

Guide on how to adjust domestic hot water and heating temperatures using the control panel.

Control Options and Maintenance

Draining and Safety Valve Procedures

Procedures for draining the system, frost protection, and safety valve information.

Servicing and Boiler Casing

Recommendations for regular servicing, cleaning the boiler casing, and general maintenance.

Technical Data Specifications

Heating System Specifications

Technical details for heating output, efficiency, and system capacities.

Hot Water, Gas, and Electrical Data

Specifications for hot water performance, gas types, and electrical requirements.

Dimensions and Heating System Design

Boiler Dimensions and Packaging

Physical dimensions of the boiler and its delivery packaging.

Heating System Design Principles

Guidelines for designing the heating system, including pipework and water volume.

Domestic Hot Water and Boiler Schematic

Hot Water System Considerations

Advice on pipe materials, flow restrictors, and water hardness.

Boiler Schematic Diagram

A detailed diagram illustrating the internal components and connections of the boiler.

Fixing Jig and Piping Installation

Fixing Jig Components and Water Connection

Description of fixing jig parts and water connection procedures.

Piping System Connections

Details on pipe diameters and connections for heating, hot water, and gas.

Piping System Installation Details

Domestic Hot Water Supply Options

Explains options for domestic hot water supply, including mixing valves.

Gas Connection and Safety Regulations

Requirements for gas connection, including pressure and safety regulations.

Boiler Location and Flue Requirements

Boiler Installation Clearances

Specifies minimum clearances around the boiler for servicing and installation.

Flue Terminal Positioning

Guidance on correct placement of the flue terminal and dimensions for clearances.

Boiler and Flue Installation Procedures

Statutory Installation Requirements

Lists legal requirements and regulations for boiler installation.

Top Outlet Flue Installation

Instructions for installing the top outlet flue system, including length calculations.

Flue Assembly and Concentric Systems

Flue Assembly Steps

Detailed steps for assembling the flue system components.

Concentric Flue System Lengths

Guidelines on maximum permissible lengths for concentric flue systems and restrictor use.

Electrical Connection and Controls

Boiler Electrical Wiring

Instructions for earthing, isolation, and connecting the boiler to the electrical supply.

External Control Connections

Details on connecting room thermostats and remote control units.

Commissioning - Initial Setup

Gas Installation and System Filling

Procedures for gas installation checks and initial system filling with water.

Commissioning - System Bleeding

Radiator and Hot Water Bleeding

Steps for bleeding air from radiators and the hot water system.

Commissioning - Boiler Operation

Boiler Lighting and Winter Mode

Instructions for lighting the boiler and setting it to winter mode with heating and hot water.

Heating Temperature Adjustment

Process for adjusting the heating temperature and managing system gases.

Commissioning - Output and Temperature Settings

Setting the Heating Output

Guide to adjusting the boiler's heating output in kW.

Setting Maximum Heating Temperature

Instructions on pre-setting the maximum heating temperature for the system.

Safety Devices and Gas Type Change

Boiler Safety Device Indicators

Explains how the boiler indicates faults like no gas, low pressure, or other errors.

General Safety Features

Describes air flow rate safety, overheat safety, power failure, and frost protection.

Changing Gas Type

Procedure for converting the boiler to a different gas type.

Boiler Settings and Bypass

Gas Valve Adjustment Procedures

Steps for setting the minimum and maximum gas valve pressures.

Bypass Adjustment Guide

Information on adjusting the boiler's built-in bypass for system requirements.

Routine Cleaning and Inspection

Service Preparation and Casing Removal

Steps for preparing the boiler for servicing and removing casing panels.

Component Cleaning Procedures

Detailed instructions for cleaning the burner, heat exchanger, and other parts.

Routine Maintenance Checks

Flue System and Fan Operation Checks

Checks for flue blockage and fan operation during normal use.

Thermistor Replacement Procedures

Procedures for replacing domestic hot water, central heating, and storage vessel thermistors.

Component Replacement - Part 1

Replacing Fan and Air Pressure Switch

Steps for replacing the fan and the air pressure switch.

Replacing Flow Sensor and PCB

Instructions for replacing the domestic water flow sensor and the main printed circuit board.

Component Replacement - Part 2

Replacing Pump and Heat Exchanger

Procedures for replacing the pump and the domestic hot water heat exchanger.

Replacing 3-Way Valve and Pressure Sensor

Steps for replacing the 3-way valve head and the system pressure sensor.

Component Replacement - Part 3

Replacing Gas Valve and Modulating Coil

Procedures for replacing the main gas valve and its modulating coil.

Replacing Safety Valves

Instructions for replacing the central heating and storage vessel safety valves.

Component Replacement - Part 4

Replacing Expansion Vessel and High Limit Thermostat

Procedures for replacing the central heating expansion vessel and high limit thermostat.

Burner and Electrode Replacement

Steps for replacing the burner, injectors, and electrodes.

Boiler Schematic Diagram

Schematic Wiring Diagram

Fault Finding - Initial Checks

Pre-Operation and Electrical Checks

Essential checks before operating the boiler, including gas, pressure, and electrical tests.

Boiler Diagnostic System

Explanation of the boiler's fault diagnostic system and indicator lights.

Fault Finding - Error Codes

List of Fault Codes and Meanings

A comprehensive list of fault codes displayed by the boiler and their corresponding issues.

Fault Finding - Component Data

Thermistor and Pressure Sensor Values

Tables showing resistance values for thermistors and pressure sensor at different temperatures/pressures.

Spare Parts List

Ordering Spare Parts Information

Instructions on how to order replacement parts, including required information.

Saunier Duval ISOMAX F 28 E Specifications

General IconGeneral
BrandSaunier Duval
ModelISOMAX F 28 E
CategoryBoiler
LanguageEnglish

Related product manuals