16 | en FH-BA-e-2430
7 Unpacking and commissioning
7.1 Unpacking
In the event of a return, please observe the instructions in the chapter
"Packaging/return transport
On receipt of the appliance, you should first check that no damage has occurred in
transit, that the outer packaging, the housing, other parts or even the appliance itself
have not been damaged. If any damage is evident, please notify SAUTER GmbH
immediately.
1.4 Initial commissioning
To ensure that the force gauge functions properly, it must be charged using the
charging cable before use.
To Next Page
Loading...
