Need help?Do you have a question about the sauter HMM and is the answer not in the manual?
General| Brand | sauter |
|---|---|
| Model | HMM |
| Category | Test Equipment |
| Language | English |
Explains the dynamic hardness tester's rebound sensor and kinetic energy loss measurement.
Details the components of the Leeb hardness tester's rebound sensor type D.
Explains the function of each key on the hardness tester for operation and navigation.
Illustrates and labels the various elements displayed on the hardness tester screen.
Lists the technical specifications of the SAUTER HMM hardness tester.
Outlines requirements for preparing the test object and its surface for accurate measurements.
Specifies the required material thickness and surface flatness for accurate hardness testing.
Details general requirements for sample preparation and surface characteristics for accurate testing.
Illustrates the steps for loading the sensor, positioning, and performing the impact test.
Covers positioning the rebound sensor and performing the impact measurement.
Explains how to interpret the hardness values displayed on the tester.
Explains how to search and view stored hardness measurement data.
Details the procedure for printing test reports wirelessly from the hardness tester.
Explains how to select the correct material code for accurate hardness conversion.
Describes how to select and adjust the impact direction for the rebound sensor.
Details how to convert HLD values to other hardness scales or tensile strength.
Provides general information and procedures for maintaining the hardness tester and its components.
Explains how to set the integrated real-time clock after battery changes or as needed.
Provides a table showing conversion ranges for various materials across different hardness scales.
Lists material codes and corresponding material types for hardness and tensile strength.
Details the items included in the delivery package of the hardness tester.
To Next Page
