Need help?Do you have a question about the sauter DB and is the answer not in the manual?
General| Measuring range [Max] | 200 N |
|---|---|
| Readout [d] | 0, 1 N |
| Measuring range [Min] | 0 N |
| Overall dimensions housing W×D×H | 73x34x156 mm |
| Material housing | Aluminium |
| Net weight | 0, 6 kg |
| Measurement Range | 200 N |
| Accuracy | 0, 5 % of [Max] |
| Resolution | 0, 1 N |
| Display | LCD, with backlight |
| Power Supply | 3 V Button cell CR2450 |
| Dimensions | 73x34x156 mm |
| Weight | 0, 6 kg |
Ensure the measuring plate is neither loaded nor exposed to any force when switching on the device.
Details the control panel keys and the procedure for powering on the instrument.
Explains CW/CCW torque display and the load indicator bar for rotation.
Explains load indicator bar movement for CW/CCW rotation.
How to zero the display using the ZERO button.
How to switch between units like N-m, kgf-cm, etc.
Switching between Track, First Peak-Torque, and Peak-Torque modes.
Displays continuous torque values detected by the load sensor.
Displays the first peak torque value measured.
Displays the highest measured torque value.
Deletes stored peak values and enables new peak value acquisition.
Backlight activates on key press or high torque, stays on for 60s.
How to save measurements using MEM/ENTER, up to 500 results.
Transferring results to PC via RS232 or USB with specific commands.
Accesses various functions like AUTO-OFF, PASS-FAIL, MEMORY, CALIBRATION, DIAGNOSTIC, ABOUT.
Sets the time after which the device switches off automatically to save battery.
Sets upper and lower torque limits to determine if measurements are PASS or FAIL.
View, delete current/all data records, and print stored data.
Calibration is performed by manufacturer's service personnel.
Checks the status of the load cell and its overload count or offset values.
Displays device information like firmware version, model, capacity, and serial number.
Ensures torque ratio corresponds to device specifications for accuracy.
Opens menu window and returns to previous page.
Zeroes the display in track mode (tare function).
Confirms menu selection and saves measured value in PEAK mode.
Outputs memory contents to PC or printer.
Deletes the current PEAK value.
Switches between units like N, gf, kgf, ozf, lbf, mN.
Assigns functions like Track, Peak Mode Train, Peak Mode Print.
Powers the device on or off.
To Next Page
