To Next PageTo Next Page
Need help?Do you have a question about the Savant SSA-3220 and is the answer not in the manual?
General| Video Bandwidth | 18 Gbps |
|---|---|
| Power Supply | 100-240V AC, 50/60 Hz |
| Supported Resolutions | Up to 4K@60Hz (4:4:4) |
| HDMI Version | 2.0 |
| Audio Formats Supported | Dolby Digital, DTS |
| Control Protocols | RS-232, IP, IR |
Conduct a site survey to note locations, room names, and wiring distances.
List all sources, displays, and controllers for system design.
Record serial numbers, MAC addresses, and other device specifics.
Understand device capabilities for A/V and control requirements.
Identify optimal connection types based on site survey and research.
Use Blueprint to layout and configure the system.
Test components to ensure correct functionality before final installation.
Recommends static IP or DHCP reservation for network stability.
Refers to the Web UI Network tab for IP settings.
Outlines reboot procedures after network changes.
Details RS-232 port wiring and pinout for communication.
Explains the use of RJ45 to DB9 adapters for RS-232 connectivity.
Describes the wiring standard for Network LAN connections (EIA 568B).
Guides on adding rooms, controllers, and the SmartAudio matrix to the layout.
Instructs on connecting amplifiers or powered speakers to the matrix.
Connects audio outputs to amplifiers or powered speakers.
Places control devices like remotes, iPads, and iPods.
Details the process for updating matrix and FPGA firmware.
Guides on configuring inputs and outputs, including trim, connections, and volume.
Instructions for updating chassis firmware using the Web UI.
