Savant TrueCommand
Note: This feature requires programming by the dealer and may not be
available on all Savant systems.
1. Press the TrueCommand button under the navigation
pad.
2. Use the Navigation pad Left and Right buttons to
navigate the TrueCommand OSD.
3. Press OK to select the desired action.
4. Press Exit to close the TrueCommand OSD.
Video Settings
The Video Settings menu allows the user to change the following settings
related to Video.
Note: The Video Settings menu only appears if the selected zone has access
to a video source.
1. Press the Left bottom button until the Main (Root)
screen appears.
2. Press the Center or Right bottom button until
Settings appears on the screen.
3. Press the Left or Right side button next to Settings in
the list of options.
4. Press the Center or Right bottom button until Video
Settings appears on the screen.
5. Press the Left or Right side button next to Video
Settings in the list of options.
Format Info
A. Current Input Format
B. Current Output Format
C.Return to Video Settings menu
Savant
®
Universal Remote User’s Guide
To Next Page
Loading...
Need help?
General
