Need help?Do you have a question about the Savaria Eclipse and is the answer not in the manual?
Controls power to cab functions, limiting use to authorized personnel.
Facilitate UP/DOWN movement between landings; auto stop at selected landing.
Sounds an alarm for emergencies when pressed.
Stops the cab and activates the alarm buzzer.
Keypad phone located on the COP, or standard phone in a box.
A single handrail is mounted on the Cab Operating Panel side of the cab.
Stays ON during power failure using a battery back-up system.
Buttons at all landings to call the cab; optional key switch for access control.
Prevents cab movement unless the door/gate is closed and locked.
Battery backup allows elevator to lower to next/first floor during power failure.
Entrance door opens automatically at landing; Push N Go feature available.
Gate opens automatically after entrance door opens; requires gate closure.
How to call and enter the cab using landing controls, including key switch operation.
How to select a landing and operate the cab using controls inside the cab.
Describes how to restore cab lights if they turn off when the door is left open.
To Next Page
General