9
Part No. 000841, 12-m01-2018 Eclipse (Micro-6) Owner’s Manual
3. OPTIONS
Automatic Door Opener
1 Press the Landing Hall Call button to call the elevator. The entrance door will
open automatically once the elevator stops at the landing.
2 Push N Go allows the entrance door to open automatically with a slight
push to the door itself. The door timer is inoperative when this feature is
activated.
Automatic Gate Opener
1 Press the Landing Hall Call button to call the elevator. If the entrance door is
equipped with an automatic door opener, it will open automatically once
the elevator stops at the landing; otherwise, open the entrance door
manually.
2 The gate will open automatically once the entrance door is fully open.
If the cab is equipped with a gate, the gate must be closed after
exiting the cab. If the gate is left open, all controls will remain
inoperable.
To Next Page
Loading...
