6
Fill the bottle completely with water and attach to the side of the
cage so your hamster can easily reach it from the floor and also fill
the feeding bowl. Attach the exercise wheel to the cage part and the
ladder to the cage floor.
7
Take the plastic tank of your Geneva and fill half way with a layer of
wood flakes. Your Geneva is now ready for your hamster.
5
Place the plastic tank below the cage part.
4
Install the cage floor.
ATTENTION
To avoid leakage,
always fill bottle 100%.
Rince spout with hot water
before first use.
www.savic.be
Ringlaan 10 • B-8501 Heule • Belgium
Tel. +32 56 35 33 45 • Fax +32 56 35 77 30
info@savic.be
To Previous Page
Loading...
