Savin C2525 - Reloading Paper Supplies; What We Liked; What We Would Like to See

Copyright © 2006 MCA Internet, LLC dba BERTL. 22 August 2006
All Rights Reserved. The license under which this document is made available and applicable law prohibit any reproduction or further transmission of any portion of this document. This
document may only be viewed electronically through the www.BERTL.com Web site and may not be stored in electronic or hard copy format. Any reproduction of trademarks is strictly
prohibited. BERTL accepts no responsibility for any inaccuracies or omissions contained in this document.
Page 6
Savin C2525
Reloading Paper Supplies
Loading paper in the Savin C2525 was straightforward.
Both paper guides have sliding adjustments that can be
adjusted with one hand. Auto paper size detection makes
the process of changing media supplies quick and accu-
rate.
The locking lever is placed at the rear of the drawer. The
handles to each drawer are accessible from both above
and below making it easier for users in wheelchairs who
may struggle to reach the lowest drawers on some rival
units.
The bypass tray is situated to the right of the main engine
unit. Paper is fed face down with solid sliding paper guides.
WHAT WE LIKED:
• The sliding design (rather than pre-cut holes) of the pa-
per guides allows for easy, one hand changes.
• 12” x 18” support through bypass allows users to create
full bleed ledger/A3 documents such as product bro-
chures, menus, etc., by trimming the unprinted borders.
• Paper cassette handles can be gripped from above or
below, making it easier to open the lower tray.
• Heavy media is supported through all main supplies
rather than just the bypass, as found on some rival sys-
tems.
• Flexible paper expansion capabilities include a tandem
2,000 sheet large capacity tray (LCT) to maximize letter/
A4 capability and dual 500-sheet universal drawers for
offices using a broader mix of media supplies.
WHAT WE WOULD LIKE TO SEE:
• A 550-sheet capacity in main drawers would allow a full
ream of paper to be added without waiting for the draw-
ers to be completely empty.
Paper Handling: Paper Input
Paper guides can be adjusted with one hand.