SawStop JSS-MCA - Using Your Saw; Operation; Normal Mode; Non-Conductive Materials

2
SawStop
®
Jobsite Saw
Non-Conductive Materials
USING YOUR SAW
NORMAL MODE
Start your saw in normal mode to cut
NON-CONDUCTIVE materials (see page 4).
• Dry wood
Madera seca
• Dry plywood or OSB
Madera seca contrachapada u OSB
• Dry pressure-treated wood
Madera seca tratada a presión
• MDF
MDF
• Plastic
Plástico
• Solid surface
Supercie sólida
• Laminate
Laminado
• Cardboard
Cartón
• Foam
Espuma
Arranque la sierra en modo normal para cortar materiales NO
CONDUCTORES (vea la página 4).
Materiales no conductores
i
CUTTING CONDUCTIVE MATERIAL IN NORMAL
MODE WILL CAUSE THE BRAKE TO ACTIVATE.
Si se corta material CONDUCTOR en el
modo normal, se provocará la activación
del freno.