10
3. Settings are made by pressing the “MODE-button” one step at a time. Releasing the
button when the required mode is reached will make your selection and start the
charging process
Stopping the Charging Process
Charging can be stopped at any time by disconnecting the power supply cord.
After Charging
1. Unplug charger from the mains supply
2. Disconnect the negative charging lead (BLACK) from the negative post of the battery
(marked -) or mass
3. Disconnect the positive charging lead (RED) from the positive terminal post of the
battery (marked +)
4. Clean and store battery charger
To Next Page
Loading...