EasyManua.ls Logo

Saxon AA 4A - Battery Compatibility and Warnings; General Warnings

Saxon AA 4A
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3
Type of Batteries
This charger is intended to be used only on 12.8V Lithium batteries and 6V & 12V Lead
Acid Batteries, e.g. WET, Gel, AGM, VRLA-Batteries. Do not try to charge unsupported
types of batteries like NiCd or non-rechargeable batteries. Follow the recommendations
of your battery´s manufacturer.
Warnings
• When not in use, store the charger in a dry area
• You should not attempt to open the battery charger
• Battery acid is corrosive and can cause burning. If skin comes into contact with any
acid, rinse and seek immediate medical advice
• Whilst charging, it’s possible that the battery may emit gasses. Ensure that there is no
potential of sparks or flames near the engine whilst in use
• Never use the charger if cables or the unit itself is damaged
• Never charge a damaged or frozen battery
• Be sure to turn off the power source before disconnecting clamps from the battery.
Likewise, only turn on power once clamps have been fitted
• Make sure that the cables and battery do not come into contact with water
• Do not place the charger on the battery whilst charging
• Always provide suitable ventilation when charging and do not cover the charger
• The charger may become slightly hot when in use which is normal
• Keep away from and out of the reach of children
• Do not leave the charger unattended for long periods
• Only use the product in environments 0-40°C
• Dispose of packaging responsibly
• Do not cover the device
• Use protecting gloves and eye-wear where necessary