To Next Page
B
Bryan OchoaAug 6, 2025
Why does my Scag Power Equipment Lawn Mower leave strips of uncut grass in the cutting path?
- RrogerschelseaAug 6, 2025
Your Scag Power Equipment Lawn Mower may leave strips of uncut grass in the cutting path due to several reasons: * **Dull or worn blades:** Sharpen the blades. * **Incorrect blade sharpening:** Ensure blades are correctly sharpened. * **Low engine RPM:** Run the engine at full RPM. * **Belt slipping:** Adjust the belt tension. * **Deck plugged with grass:** Clean the underside of the deck. * **Ground speed too fast:** Slow down to adjust for conditions. * **Wet grass:** Cut grass after it has dried out. * **Bent blades:** Replace the blades.
General
