Scag Power Equipment SVRII-36A-23BV User Manual (English)

Questions and Answers:

D
debbiebrockAug 3, 2025
Why is my Scag Power Equipment SVRII-36A-23BV Lawn Mower leaving strips of uncut grass?
- C
  calvaradoAug 3, 2025
  To address strips of uncut grass in the cutting path when using your Scag Power Equipment Lawn Mower, ensure the blades are sharp. If they are dull or worn, sharpen them. Also, check that the engine is running at full RPM. Adjust the belt tension if it's slipping, and clean the underside of the deck to remove any grass accumulation. Slow down your ground speed, especially if the grass is wet. If the blades are bent, replace them. Cutting grass after it has dried out can also help.
J
Joseph HerreraAug 7, 2025
How to fix uncut grass blades with my Scag Power Equipment SVRII-36A-23BV?
- R
  robert42Aug 7, 2025
  To fix occasional blades of uncut grass with your Scag Power Equipment Lawn Mower, ensure the engine is running at full RPM. Reduce your ground speed to suit the conditions, and only cut when the grass is dry. Sharpen dull blades and clean any grass accumulation from the underside of the deck. Adjust belt tension if the belts are slipping.
B
bfisherAug 12, 2025
Why is my Scag Power Equipment SVRII-36A-23BV Lawn Mower cutting unevenly on flat ground?
- D
  daisy86Aug 12, 2025
  If your Scag Power Equipment Lawn Mower is producing an uneven cut on flat ground, resulting in a wavy, high-low appearance, a scalloped cut, or a rough contour, replace the blade if the lift is worn. Ensure the blade is mounted correctly with the cutting edge toward the ground. Clean any grass accumulation from the underside of the deck. Adjust the pitch and level if there's too much blade angle. For issues with deck mounting or a bent spindle area, consult your authorized SCAG dealer. Also, ensure the blade is sharp.
J
Jacob HeathAug 15, 2025
What to do if Scag Power Equipment Lawn Mower leaves strips between cutting paths?
- M
  Michelle KingAug 15, 2025
  To resolve strips of uncut grass between cutting paths with your Scag Power Equipment Lawn Mower, increase the overlap of each pass.
L
Lisa RodriguezAug 20, 2025
What to do if my Scag Power Equipment Lawn Mower is scalping?
- G
  George CollinsAug 20, 2025
  If your Scag Power Equipment Lawn Mower is scalping, meaning the blades are hitting the dirt or cutting too close to the ground, check and adjust the tire pressures. Reduce ground speed, especially on rough terrain, and consider raising the cutting height. If the grass is wet, wait until it dries out before cutting. You may also need to change the direction of cut, and/or adjust the pitch and level.
S
shillAug 25, 2025
How to fix a sloping ridge with Scag Power Equipment SVRII-36A-23BV?
- K
  Keith DanielsAug 25, 2025
  To correct a sloping ridge across the width of the cutting path with your Scag Power Equipment Lawn Mower, start by checking and adjusting the tire pressure to ensure they are equal. Also, check if the wheels are uneven and adjust their pressure accordingly. If the deck is mounted incorrectly or is not level side-to-side, consult your authorized SCAG dealer or check for level and correct it.
G
gsummersAug 29, 2025
How to resolve a ridge in the center of the cut with my Scag Power Equipment SVRII-36A-23BV Lawn Mower?
- A
  Angela McclureAug 29, 2025
  If your Scag Power Equipment Lawn Mower is leaving a ridge in the center of the cutting path, it could be due to blades not mounted evenly. Adjust the pitch and level. A bent blade can also cause this issue, so replace it if necessary. For internal spindle failure or incorrect spindle mounting, consult your authorized SCAG dealer.

Scag Power Equipment SVRII-36A-23BV Specifications

General

Engine Manufacturer	Briggs & Stratton
Engine Model	Vanguard
Engine Size	23 HP
Cutting Width	36 inches
Tires (Front)	11 x 4-5
Deck Type	Fabricated
Spindle Material	Aluminum
Fuel Capacity	5.5 gal (20.8 L)
Cutting Height	1.5 in to 4.5 in (3.8 cm to 11.4 cm)

Summary

Scag Mower General Information

Introduction to Scag Mower Manual

Overview of the operator's manual and essential mower care information.

Directional References in Manual

Defines directional terms like 'front', 'rear', 'left', and 'right' as used in the manual.

Servicing Engine and Drive Train

Guidance on servicing engine and drive train components, referring users to dealers.

Understanding Scag Mower Symbols

Explains the meaning of various symbols used throughout the manual and on mower decals.

Scag Mower Safety Information

Mower Safety Introduction

Emphasizes operator responsibility for safety and the importance of proper training.

Understanding Safety Signal Words

Defines signal words like DANGER, WARNING, and CAUTION to indicate hazard severity.

Pre-Operation Safety Checks

Key safety checks and considerations required before operating the mower.

Testing Safety Interlock System

Step-by-step procedures for testing the mower's safety interlock system.

Safe Mowing Operation Guidelines

Essential guidelines for safe and efficient mower operation, including slope limits.

Maintenance and Storage Safety

Guidelines for safe maintenance practices and proper mower storage.

Spark Arrestor Requirements

Information regarding spark arrestor requirements for specific land types.

Spark Ignition System Compliance

Compliance statement for the mower's spark ignition system.

Understanding Safety Decals

Identifies and explains the purpose of various safety and instructional decals on the mower.

Scag Mower Specifications

Engine Specifications

Details engine type, displacement, cylinders, governor, idle speed, fuel, and starter.

Electrical System Specifications

Information on electrical system components like starter, switches, and instrument panel.

Engine Deck Specifications

Specifications for the engine deck drive system, pumps, wheels, and fuel tank.

Cutter Deck Specifications

Details on cutter deck type, construction, width, height adjustment, and blades.

Mower Weights and Dimensions

Provides length, width, height, and weight specifications for different mower models.

Mower Productivity Estimates

Estimates acres cut per day based on cutting width and operating hours.

Scag Mower Operating Instructions

Tiger Eye Instrument Identification

Identifies and explains the functions of the Tiger Eye monitoring system indicators.

Mower Controls Identification

Details the function and location of various mower controls and instruments.

Safety Interlock System Explained

Explains the purpose and function of the mower's safety interlock system.

Testing the Safety Interlock System

Step-by-step guide to test the functionality of the safety interlock system.

Initial Run-In Procedures

Recommended procedures for the first 20 hours of mower operation.

Starting the Engine Safely

Step-by-step instructions for safely starting the mower's engine.

Ground Travel and Steering Operation

Instructions on operating the mower's ground travel and steering controls.

Engaging Cutter Blades

Procedure for engaging and disengaging the mower deck drive system.

Operating on Hillsides Safely

Safety precautions and guidelines for operating the mower on slopes.

Parking the Mower Correctly

Steps for safely parking the mower on level surfaces.

Post-Operation Procedures

Procedures for cleaning and basic checks after operating the mower.

Clearing Clogged Discharge Chutes

Safe procedures for clearing clogged discharge chutes.

Moving Mower with Engine Stopped

How to move the mower manually when the engine is off.

Mowing Performance Recommendations

Tips for optimal mowing performance and lawn appearance.

Adjusting Cutting Height

Instructions on how to adjust the mower deck cutting height.

Scag Mower Adjustments

Parking Brake Adjustment Procedure

Procedure for adjusting the mower's parking brake for proper operation.

Travel Adjustment for Straight Mowing

Adjustments for neutral and tracking to ensure straight mower travel.

Neutral Adjustment

How to adjust the mower to prevent creeping when controls are neutral.

Tracking Adjustment

How to adjust mower to ensure it travels straight when controls are forward.

Throttle and Choke Adjustments

Refers to dealer for engine throttle and choke adjustments.

Drive Belt Adjustments

General information on checking drive belts for alignment and wear.

Belt Alignment Checks

Contact dealer for belt alignment issues causing wear or breakage.

Cutter Deck Adjustments

Procedures for setting cutter deck level, pitch, and height.

Adjusting Cutter Deck Level

How to adjust the deck to ensure it is level side-to-side.

Adjusting Cutter Deck Pitch

How to adjust the deck to ensure proper front-to-rear pitch.

Electric Clutch Adjustment

Procedure for adjusting the air gap on the electric clutch.

Operator Cushion and Cover Removal

Instructions for removing operator cushion and rear cover for maintenance access.

Adjusting Operator Suspension Platform

How to adjust the operator suspension platform for ride comfort.

Scag Mower Maintenance

Maintenance Service Intervals Chart

A chart detailing maintenance tasks and their recommended service intervals.

Lubrication Guide

Grease fitting lubrication chart and compatible greases.

Hydraulic System Maintenance

Procedures for checking and changing hydraulic oil.

Checking Hydraulic Oil Level

Procedure for checking the hydraulic oil level in the reservoir.

Changing Hydraulic Oil

Procedure for draining and replacing hydraulic oil and filter.

Engine Oil Maintenance

Procedures for checking engine oil level and changing the oil filter.

Checking Engine Oil Level

Procedure for checking engine oil level daily or every 8 hours of operation.

Changing Engine Oil Filter

Procedure for replacing the engine oil filter after initial service and subsequent intervals.

Engine Fuel System Maintenance

Instructions for filling the fuel tank and replacing the fuel filter.

Filling the Fuel Tank Safely

Instructions for safely filling the fuel tank with appropriate gasoline.

Replacing Fuel Filter Elements

Procedure for replacing the engine fuel filter after specified operating hours.

Engine Air Cleaner Maintenance

Procedures for cleaning or replacing the air cleaner element.

Cleaning and Replacing Air Cleaner

Procedure for inspecting, cleaning, or replacing the air cleaner element.

Battery Maintenance

Safety and procedures related to the mower's battery.

Charging the Mower Battery

Guidance on charging the mower battery, including safety precautions.

Jump Starting the Mower Battery

Procedure for safely jump starting the mower battery.

Drive Belt Checks and Replacement

Information on checking drive belts and the critical importance of the pump drive belt.

Cutter Blade Maintenance

Procedures for inspecting, sharpening, and replacing cutter blades.

Inspecting Cutter Blades

Instructions for checking cutter blades for straightness, wear, and sharpness.

Sharpening Cutter Blades

Guidance on sharpening cutter blades and checking blade balance.

Replacing Cutter Blades

Procedure for safely replacing worn or damaged cutter blades.

Tire Pressure Checks

Reminder to check tire pressures regularly.

Body and Deck Care

Instructions for cleaning the mower body and deck and repairing surfaces.

Scag Mower Illustrated Parts List

Scag Approved Attachments and Accessories

List of Scag-approved attachments and accessories for the mower.

Scag Mower Cutter Deck Parts

Scag Mower Cutter Deck Controls Parts

Scag Mower Sheet Metal Components

Scag Mower Steering Controls Parts

Scag Mower Fuel System Parts

Scag Mower Hydraulics and Engine Components

Scag Mower Electrical System

Scag Mower Hydraulic Pump Parts

Scag Mower Replacement Decals

Scag Mower Electrical Schematics

Scag Mower Limited Warranty

Related product manuals

Scag Power Equipment SM-61

25 pages

Scag Power Equipment SMWC-52V

34 pages

Scag Power Equipment SW32-13KA

28 pages

Scag Power Equipment SW32-13BV

24 pages

Scag Power Equipment SW36-13KH